| 【代表性论文】（ASCE/ACI 学会会刊论文） He Zhi-Qi, Chen Jiatong, Liu Zhao, Ma Z J. An explicit approach for determining the rational length of steel portion in steel–concrete hybrid girder bridges. ASCE Journal of Bridge Engineering, 2023,28(1)：05022011. Tong Teng, Yuan Siqi, Liu Zhao, He Zhi-Qi, Wang Jingquan. Experiments and stress-strain model of concrete confined by UHPC materials. ASCE Journal of Materials in Civil Engineering, 2023,35(4)：04023006. He Zhi-Qi, Tang Minghao, Xu Tian, Liu Zhao, Ma Z J. Additional shear stresses in webs of segmental concrete bridges due to anchorage of cantilever tendons. ASCE Journal of Bridge Engineering, 2021, 26(7): 04021041. He Zhi-Qi, Xu Tian, Liu Zhao, Ma Z J. Overlap of splitting in slabs with closely spaced intermediate anchorages. ASCE Journal of Bridge Engineering, 2020, 25(8): 04020045. He Zhi-Qi, Zhuo Weiding, Jiang Yedong, Zhang Shixiang, Liu Zhao, Ma Z J. Transverse post-tensioning in long-span concrete box-girder bridges: refined modeling and alternative system. ASCE Journal of Bridge Engineering, 2020, 25(3): 04020005. He Zhi-Qi, Liu Zhao, Wang Jingquan, Ma Z J. Development of strut-and-tie models using load path in structural concrete.ASCE Journal of Structural Engineering, 2020, 146(5): 06020004. Zhou Linyun, Liu Zhao, He Zhi-Qi. Elastic-to-plastic strut-and-tie model for deep beams. ASCE Journal of Bridge Engineering, 2018, 23(4): 04018007. He Zhi-Qi, Liu Zhao, Ma Z J. Shear deformations of RC beams under service loads. ASCE Journal of Structural Engineering, 2017, 143(1): 04016153. Zhou Linyun, Liu Zhao, He Zhi-Qi. Elastic-to-plastic strut-and-tie model for concentric anchorage zones. ASCE Journal of Bridge Engineering, 2017, 22(10): 04017070. Zhou Linyun, Liu Zhao, He Zhi-Qi. Crack propagation and control in concentric anchorage zones. ASCE Journal of Bridge Engineering, 2017, 22(10): 04017075. He Zhi-Qi, Liu Zhao, Ma Z J. Simplified shear design of slender reinforced concrete beams with stirrups. ASCE Journal of Structural Engineering, 2016, 142(2): 06015003. He Zhi-Qi, Liu Zhao, Ma Z J. Closure to simplified shear design of slender reinforced concrete beams with stirrups. ASCE Journal of Structural Engineering, 2016, 142(11): 07016009. He Zhi-Qi, Liu Zhao, Ma Z J. Explicit solutions of transverse tensions in deep beams: load-path model and superposition principle. ACI Structural Journal, 2014, 111(3): 583-594. He Zhi-Qi, Liu Zhao, Ma Z J. Closure to investigation of load transfer mechanisms in deep beams and corbels. ACI Structural Journal, 2013, 119(3): 534-536. He Zhi-Qi, Ma Z J, Chapman C E, Liu Zhao. Longitudinal joints with accelerated construction features in decked bulb-tee girder bridges: strut-and-tie model and design guidelines. ASCE Journal of Bridge Engineering, 2013, 18(5): 372-379. He Zhi-Qi, Liu Zhao, Ma Z J. Investigation of load transfer mechanisms in deep beams and corbels. ACI Structural Journal, 2012, 109(4): 467-476. Ma Z J, Lewis S, Cao Qi, He Zhi-Qi, Burdette E, French C. Transverse joint details with tight bend diameter U-bars for accelerated bridge construction. ASCE Journal of Structural Engineering, 2012, 138(6): 697-707. He Zhi-Qi, Liu Zhao. Investigation of bursting forces in anchorage zones: compression- dispersion models and unified design equation. ASCE Journal of Bridge Engineering, 2011, 16(6): 820-827. He Zhi-Qi, Liu Zhao. Stresses in external and internal unbonded tendons: unified methodology and design equations. ASCE Journal of Structural Engineering, 2010, 136(9): 1055-1065. 完整论文清单详见：https://www.researchgate.net/profile/Zhi-Qi-He
【参编标准/规范】 中华人民共和国行业标准：《公路装配式混凝土桥梁施工技术规范》(JTG/T 3654-2022) 中华人民共和国行业标准：《公路钢筋混凝土及预应力混凝土桥涵设计规范》（JTG 3362-2018） 中华人民共和国行业标准：《公路工程混凝土结构耐久性设计规范》（JTG/T 3310-2019） 中国公路学会标准：《公路混凝土桥梁体外预应力加固技术指南》（T/CHTS 10015-2019） 江苏省标准：《节段预制拼装混凝土桥梁设计与施工规范》（DB32/T 3564-2019） 江苏省标准：《装配式钢混组合桥梁设计规范》（DB32/T 3563-2019） |
