期刊论文(第一作者或通讯作者) 1. Zhiyan Xing, Jin Zhang, Chengyu Zheng, Material model development and fire resistance research on CLT wall-floor angle bracket connections in OpenSees. Construction and Building Materials, 2022. 347: p. 12860. 2. Zhiyan Xing, Jin Zhang, Chengyu Zheng, Chuan Lu, Experimental study and finite element analysis on residual carrying capacity of CLT wall-floor angle bracket connections after fire. Construction and Building Materials, 2022. 328: p. 127113. 3. Zhiyan Xing; Jin Zhang; Chen Hao; Research on fire resistance and material model development of CLT components based on OpenSees, Journal of Building Engineering, 2022.1, 45, 103670 4. Zhiyan Xing; Yuexiang Wang; Jin Zhang; Hao Ma; Comparative study on fire resistance and zero strength layer thickness of CLT floor under natural fire and standard fire, Construction and Building Materials, 2021.10, 302, 123468 5. Bai, Yu; Zhang, Jin; Shen, Hao; Residual compressive load-carrying capacity of cross-laminated timber walls after exposed to one-side fire, Journal of Building Engineering, 2021, 34, 101931 6. Bai, Yu; Zhang, Jin; Shen, Hao; Experimental and numerical analysis of residual load-carrying capacity of cross-laminated timber walls after fire, Structures, 2021, 30: 50-61. 7. Zhang, Jin; Shen, Hao; Qiu, Ronggen; Xu, Qingfeng; Gao, Sen; Short-Term Flexural Behavior of Prestressed Glulam Beams Reinforced with Curved Tendons, Journal of Structural Engineering, ASCE, Volume: 146 Issue: 6 Article Number: 04020086 DOI: 10.1061/(ASCE)ST.1943-541X.0002625 8. YuexiangWang, Jin Zhang*, Fang Mei, Jianan Liao and Weibin Li, Experimental and numerical analysis on fire behaviour of loaded cross laminated timber panels, Advances in Structural Engineering, 2019, Vol. 23(1) 22–36 9. Jin Zhang, Yuexiang Wang, Linfeng Li, Qingfeng Xu, Thermo-mechanical behaviour of dovetail timber joints under fire exposure, Fire Safety Journal, 2019.7, 107 () 75-88 10. Jin Zhang, Qiang Zhang, Donghao Zhang, Qingfeng Xu, Weibin Li, Experimental and numerical study on compressive performance of perforated brick masonry after fire exposure, Fire and Materials, 2019.3, 43 (2): 200-218 11. Jin Zhang, Hao Ma, Cheng Li, Qingfeng Xu, Weibin Li, Experimental study on seismic performance of fire-exposed perforated brick masonry wall, Construction and Building Materials, 2018.8, 180, 77-91 12. Jin Zhang, Yixiang Xu, Fang Mei, Cheng Li, Experimental study on the fire performance of straight-line dovetail joints, Journal of Wood Science, 2018.6, 64 (3), 193-208 13. Jin Zhang, Yi-Xiang Xu, Xiao-Jing Yang, Dong-Hao Zhang, FIRE-RESISTANCE STUDY OF RESTRAINED STEEL COLUMNS WITH INITIAL LATERAL DISPLACEMENT, Advanced Steel Construction, 2018.3, 14 (1), 22-36 14. Zhang, Jin ,Xu, Qing-feng,Xu, Yi-xiang,Zhang, Ming,Research on residual bending capacities of used wood members based on the correlation between non-destructive testing results and the mechanical properties of wood,Journal of Zhejiang University-Science A, 2015.7, 16 (7): 541~550 15. ZHANG Jin,LIU ZengHui,XU YiXiang,MA ShuWei,XU QingFeng, An experimental and numerical study on the charring rate of timber beams exposed to three-side fire,Science in China - Series E: Technological Sciences, 2012.12, 55 (12): 3434~3444 16. Jin Zhang ,Qing-feng Xu,Yi-xiang Xu,Bin Wang,Jing-Xiang Shang,A numerical study on fire endurance of wood beams exposed to three-side fire,Journal of Zhejiang University-Science A(Applied Physics & Engineering, 2012.7, 13 (7): 491~505 17. 张晋,孙一鸣,王跃翔,陆川,王卫昌,吴磊,室内火灾作用下正交胶合木结构受火性能研究,建筑结构学报,2022.9,43(9):115-127 18. 白羽,张晋,王卫昌,CLT楼板半层搭接节点的面外弯曲性能试验研究,湖南大学学报(自然科学版),2022.5,49(5):120-129 19. 张晋,姜坤,陆川,正交胶合木墙体楼板角撑连接节点受火后受剪承载力计算方法,东南大学学报(自然科学版),2022.1,52(1):65-73 20. 张晋,刘得龙,张强,白羽,正交胶合木墙体耐火极限试验及数值模拟,华南理工大学学报(自然科学版),2021.4,49(4):9-19 21. 张晋,陈豪,白羽,廖家男,正交胶合木楼板炭化速度有限元分析,同济大学学报(自然科学版),2020.8,48(8):1122-1131 22. 张晋,陆川,梅方,王卫昌,李维滨,CLT楼板耐火极限计算中零强度层厚度取值研究,湖南大学学报(自然科学版),2020.3,47(3):73-81 23. 张晋,张强,柏益伟,李维滨,蔡建国,燕尾榫节点梁柱式木框架抗火性能试验研究,建筑结构学报,2019.10,40(10):188-196 24. 张晋,吴磊,廖家男,王卫昌,李维滨,考虑层板脱落影响的正交胶合木楼板炭化速度试验研究,东南大学学报(自然科学版),2019.7,49(4):705-711 25. 张晋,王卫昌,仇荣根,沈浩,许清风,高森,体内预应力胶合木梁短期受弯性能试验研究,土木工程学报,2019.5,52(5):23-34 26. 张悦洋,张晋,李维滨,蔡建国,钢填板-螺栓连接胶合木框架结构耐火试验与有限元分析,建筑结构学报,2018.9,39(9):53-65 27. 张晋,沈浩,高森,李维滨,许清风,体内预应力胶合木梁抗弯承载力研究,湖南大学学报(自然科学版),2018.5,45(5):134-142 28. 张晋,廖家男,许清风,张鸣,基于无损检测的梁柱式木框架受火后剩余承载力研究,土木工程学报,2017.11,50(11):45-56 29. 张晋,王斌,宗钟凌,侯士通,柏益伟,木结构榫卯节点耐火极限试验研究,湖南大学学报(自然科学版),2016.1,(01):117~123 30. 张晋,许清风,柏益伟,蔡建国,胶合木钢夹板螺栓连接节点的抗火性能,华南理工大学学报(自然科学版),2015.2,(02):58~65 31. 张晋,许清风,张鸣,蔡建国,马树伟,拱形张弦胶合木梁结构受力性能试验研究,建筑结构学报,2014.5,(05):104~113 32. 张晋,许清风,李维滨,李向民,商景祥,木梁四面受火炭化速度及剩余受弯承载力试验研究,土木工程学报,2013.2,(02):24~33 33. 张晋,罗鑫昌,蔡建国,杨小敬,冯健,分段施工方法对大型张弦桁架结构设计的影响,深圳大学学报(理工版),2012.03,(02):142~147 34. 张晋,王亚超,许清风,杨小敬,李向民,基于无损检测的超役黄杉和杉木构件的剩余强度分析,中南大学学报(自然科学版),2011.12,(06):78~82 35. 张晋,许清风,章东昊,李维滨,王卓琳,砌体结构高温性能研究进展,结构工程师,2018.12,34(6):149-157 36. 张晋,章东昊,蔡建国,宗钟凌,木结构连续倒塌研究现状,工业建筑,2016.12,(12):116~122 37. 候士通,张晋,基于Python的梁柱式木结构框架抗火数值模拟系统,南京工业大学学报(自然科学版),2016.09.15,(05):105~110 38. 张晋,李成,张悦洋,蔡建国,木结构抗火性能及防火设计研究现状,工业建筑,2016.01,(02):112~119 39. 张晋,蔡建国,刘增辉,张悦洋,张鸣,木材-T型钢填板螺栓连接节点耐火极限试验,沈阳工业大学学报,2015.7.01,(05):594~600 40. 张晋,许清风,商景祥,木柱单面及相邻两面受火后的剩余承载力试验,沈阳工业大学学报,2013.5,(04):461~468 41. 张晋,冯健,范圣刚,蔡建国,联合加拿大不列颠哥伦比亚大学的木结构课程教学,高等建筑教育,2014.4,23(4):63~67
专著
1. 许清风、张晋、陈玲珠. 基于炭化速度的木结构抗火性能研究,中国建筑工业出版社,2023. 2. 邱洪兴、彭磊、张晋、连之伟、徐明、陈玲珠、高颖、邱培芳,木竹结构安全性、耐久性和舒适性,东南大学出版社,2021. 3. 冯健、秦卫红、吴京、张晋,土木工程CAD(第2版),东南大学出版社,2012
参编规范 1. 国家规范《预应力混凝土路面工程技术规范 GB 50422-2017》 2. 国家建工行业建设标准《预制预应力混凝土装配整体式框架结构技术规程 JGJ 224-2010》 3. 江苏省地方标准《钢筋混凝土异形柱框架结构技术规程 DB32/512-2002》 4. 江苏省工程建设标准《装配整体式混凝土框架结构技术规程DGJ32/TJ 219-2017》 5. 团体标准《工程竹材T/CECS 10138-2021》 6. 团体标准《工程竹结构设计标准T/CECS 1101-2022》 7. 团体标准《木结构防火设计标准T/CECS 1104-2022》
|