郑宝锋，1984年9月生，山东德州人，博士、副教授、国家一级注册结构工程师、中国钢结构协会结构稳定与疲劳分会青年理事、江苏省土木建筑学会钢结构专业委员会委员；Journal of Constructional Steel Research、Engineering Structures、Thin-Walled Structures、Structures、建筑结构学报、建筑钢结构进展等杂志审稿人；主持国家自然科学基金面上项目一项、国家重点研发计划子课题一项、国家自然科学基金青年项目一项、江苏省自然科学基金青年项目一项；发表论文30余篇，获中国钢结构协会一等奖，中国工程建设标准化协会标准科技创新奖一等奖各一项。

工作及教育经历 

2003.08-2007.06   东南大学土木工程学院本科，结构工程

2007.09-2010.08   东南大学土木工程学院硕士研究生，导师：舒赣平

2010.10-2016.12   东南大学土木工程学院博士研究生，导师：舒赣平

2013.01-2014.01   美国约翰霍普金斯大学土木工程系联合培养，导师：B.W. Schafer

2017.09~2020.05   东南大学土木工程学院建筑工程系讲师

2020.06~至今     东南大学土木工程学院建筑工程系副教授

中国钢结构协会结构稳定与疲劳分会青年理事；江苏省土木建筑学会钢结构专业委员会委员；Journal of Constructional Steel Research、Engineering Structures、Thin-Walled Structures、Structures、建筑结构学报、建筑钢结构进展等杂志审稿人。

• 《程序语言与科学计算I》本科生课程 64课时

• 《程序语言与科学计算II》本科生课程 32课时

• 《建筑结构设计》本科生课程 32课时

科研项目

• 2023.01~至今 国家自然科学基金面上项目：含新型自复位屈曲约束支撑的不锈钢框架结构的抗震性能研究（52278152），主持；

• 2019.01 ~2021.12 国家自然科学基金青年项目：不锈钢结构高强度螺栓端板连接节点的抗震性能与设计方法研究（51808110），主持；

• 2018.07 ~2021.7 江苏省自然科学基金青年项目：基于新型不锈钢高强度螺栓连接的不锈钢结构梁柱节点的抗震性能研究（BK20180399），主持；

• 2019.01 ~2021.12 国家重点研发计划，2018YFC0705502-4，“高性能建筑结构钢材应用关键技术与示范”项目课题二“耐火钢、耐候钢、不锈钢设计理论和工程技术与示范”子课题四“不锈钢结构设计理论与方法及应用关键技术研究”，参与；

• 2020.01~至今住房和城乡建设部研究开发项目，2020-K-070，有机玻璃在建筑与结构领域的应用技术研究，参与；

教改项目

• 2021.11-2023.02   东南大学“课程思政”校级示范课改革试点立项建设项目：程序语言与科学计算I，主持。

期刊论文

1. Zheng Baofeng*, Wu Dianhan, Wang Jiachang, Shu Ganping. Test on seismic behaviors of stainless steel bolted extended end-plate beam-column joints. Thin-Walled Structures, 2024, 196, 111516. 

2. Chen Zhanpeng, Zheng Baofeng*, Shu Ganping. Classification criteria for austenitic stainless steel H-section under cyclic loading about major-axis. Journal of Constructional Steel Research, 214, March 2024, 108240

3. Zhang Sibo, Zheng Baofeng*, Yao Jianyu, Shu Ganping. Test and constitutive modelling of wire arc additively manufactured stainless steel. Journal of Constructional Steel Research, 214, March 2024, 108474.

4. Zheng Baofeng*, Wu Dianhan, Wang Jiachang, Shu Ganping. Study on ductile fracture behaviors of stainless steel S30408 and its weld. Journal of Constructional Steel Research, 214, March 2024, 108498. 

5. Baofeng Zheng*, Sibo Zhang, Sen Yang, Ganping Shu, Shutong Dong. S600E high-strength stainless steel welded section columns: Bearing capacity test and design method. Thin-walled Structures, 2023, 183, 110423.

6. Baofeng Zheng*, Sibo Zhang, Lei Yu, Ganping Shu, Shutong Dong. Behavior of high-strength stainless steel S600E welded I-section beams. Structures, 2023, 47:2381-2396.

7.  Baofeng Zheng*, Xiaohui Liao, Buchen Wu, Ganping Shu. Crippling of cold-formed stainless steel circular tubular members under concentrated bearing loads. Thin-walled Structures,2023, 182: 110215.

8. Baofeng Zheng*, Buchen Wu, Jiachang Wang, Ganping Shu, Qinglin Jiang. Design of stainless steel gapped K-joints in cold-formed square hollow sections[J]. Journal of Constructional Steel Research,2022, 190,107105.

9. Mingyu Zhang, Baofeng Zheng*, Jiachang Wang, Buchen Wu, Ganping Shu. Study on fracture properties of duplex stainless steel and its weld based on micromechanical models[J]. Journal of Constructional Steel Research,2022, 190,107115.

10. Baofeng Zheng*, Jiachang Wang, Yueyan Gu, Ganping Shu, Jun Xie, Qinglin Jiang. Experimental study on stainless steel high-strength bolted slip-resistant connections. Engineering Structures,2021, 231(15): 111778, DOI:10.1016/j.engstruct.2020.111778

11. Jiachang Wang, Ganping Shu, Xiu Xu, Shutong Dong, Baofeng Zheng*. Study on mechanical properties of high strength sorbite stainless steel S600E under monotonic and cyclic loadings., Structures,2021,34:2665-2678.

12. Baofeng Zheng*, Kui Zhang, Jiachang Wang, Ganping Shu, Qinglin Jiang. Test and design of stainless steel K-joints in cold-formed circular hollow sections. Journal of Constructional Steel Research 2020,177: 106447. DOI:10.1016/j.jcsr.2020.106447.

13. Jiachang Wang, Kui Zhang, Ganping Shu, Baofeng Zheng*, Qinglin Jiang. Investigations on Stainless Steel T- and Y-joints in Cold-rolled Circular Hollow Sections. Journal of Constructional Steel Research 2020,177: 106462. DOI:10.1016/j.jcsr.2020.106462.

14. Ganping Shu, Xiu Xu, Yueyan Gu, Qinglin Jiang, Baofeng Zheng*. Study on the lateral-torsional buckling of duplex stainless steel welded I-section flexural members. Steel construction(Chinese & English), 2021,36(2): 11:25.

15. Baofeng Zheng*, Sen Yang, Xin Jin, Ganping Shu, Shutong Dong, Qinglin Jiang, Test on residual stress distribution of welded S600E high-strength stainless steel sections. Journal of Constructional Steel Research 2020,168: 105994.

16. Ganping Shu, Sen Yang, Xin Jin, Shutong Dong, Qinglin Jiang, Baofeng Zheng*. Study on the bearing capacity of S600E high-strength stainless steel welded cross-sections. Journal of Constructional Steel Research, 2020,175, 106386.

17. Baofeng Zheng*, Ganping Shu, Jiachang Wang, Yueyan Gu, and Qinglin Jiang. Predictions of material properties in cold-rolled austenitic stainless steel tubular sections. Journal of Constructional Steel Research, 2020, 164: 105820.

18. Baofeng Zheng*, Ganping Shu, Fuzhe Xie, and Qinglin Jiang. Design of cold-rolled stainless steel rectangular hollow section columns. Journal of Constructional Steel Research, 2020, 170: 106072.

参编规范

[1]中国标准化协会标准《不锈钢结构技术规程》 (CECS 410-2015). 北京, 中国计划出版社, 2015.

[2]中华人民共和国国家标准《建筑用不锈钢压型板》 (GB/T 36145-2018). 北京, 中国标准出版社, 2018.

[3] ASCE Standard. 《Specification for the design of cold-formed stainless steel structural members》ASCE/SEI 8-22，2024.

[4]中国标准化协会标准《建筑有机玻璃应用技术规程》编制中.

[5]中国标准化协会标准《建筑用不锈钢高强度螺栓》编制中.